Responding to an Eye Injury

Why This Matters

Responding to an Eye Injury deserves a specific pre-task check because flying particles, splashes, radiation and pressurized releases can injure eyes in a fraction of a second. For this briefing, connect the topic to the exact equipment, work area and conditions the crew will face today, and agree a clear stop-work trigger before the task begins.

Key Points

• Chemical exposure requires immediate flushing for a minimum of 15 continuous minutes at an eyewash station, regardless of perceived severity
• Embedded foreign objects should never be manually removed — cover the eye and obtain medical evaluation
• Any eye injury involving vision change should be treated as an emergency, even if pain subsides quickly

Best Practices

• Select eye protection rated for the specific hazard present — impact, splash, or radiant energy — per the task hazard assessment
• Add a face shield over primary eye protection for grinding, cutting, or chemical splash exposure
• Remove and replace scratched, pitted, or degraded lenses, which distort vision and compromise protective performance
• Maintain accessible, functioning eyewash stations near any chemical handling task and confirm activation procedure beforehand
• Never attempt to manually clear debris from an eye — flush at an eyewash station instead
• Verify compatibility and fit of eye protection with other required PPE, including respirators and hard hats

Scenario & Site Check

Discuss this scenario: A crew is about to start work where responding to an eye injury is relevant, but one condition in the work area has changed since the task was last performed. Ask the team what could make that change important, which control must be verified first, and who has authority to stop the job.

• Field check: match eye/face protection to the actual hazard and check condition, fit and compatibility with other PPE.
• Evidence: confirm the applicable permit, inspection, label, test result, procedure or equipment status rather than relying only on memory.
• Close-out question: “What would make us stop and reassess this task today?”

Reference Point

Use the current requirement that applies to your site. A useful starting point for Eye Face Protection is OSHA / NIOSH primary guidance. Company procedures, manufacturer instructions and local law may impose additional or more stringent controls.